Spanwell offers Long Reach Air Scalers in Carbon Steel, Stainless Steel and the MCH Heavy Duty Model.
- The long reach allows you to stand instead of kneeling while cleaning and chipping
- Offered in four different lengths to choose the best length for your toughest job
- Many processes use grating systems; long reach scalers allow you to reach into those hard to reach areas. Boeing uses this tool to clean old paint from the floor of their grating system
- The stainless steel model is built for highly corrosive and moist environments
- Stainless inside and out means that in a shipyard it will outlast carbon tools (Carbon tools when used and maintained as recommended continue to perform perfectly even after 17 years)
- Stainless steel is required in explosion proof environments
- The Long Reach MCH Heavy Duty Model is a heavier hitting scaler, weighs more and uses a larger chisel
- We have 25 years of experience with air (pneumatic) tools. We can help you select the right tool for the job based on the surfaces and the residues you need to tackle
- Power Plants clean fly ash from scrubber systems, chip coal from coal handling equipment, clean boiler tubes and break up coal clinkers in boilers
- Refineries use for cleaning crude from grates; any areas with buildup
- Boat builders use them for removing old fiberglass when refurbishing boats
- Tank builders use to clean the inside of tanks and prepare surfaces for welds using corrosion resistant stainless steel chisels
- Shipyards use them to remove barnacles, surface prep for paint and repair
- Pot Ash – remove buildup, clean ash handling equipment
- View a video of our Long Reach Air Scaler in action
- Power Plants
- Refineries
- Pot Ash Mining
- Industrial Tank Fabrication & Maintenance
- Industrial Cleaning
- Shipyards
- Chimney Cleaning Industry
Long Reach Carbon Steel Scalers
Our Long Reach Scalers built for heavy duty industrial cleaning applications. Constructed with a carbon steel throttle and scaler body and a high-alloy aluminum barrel. Offered in four different lengths. Comes with a Wide Flat Carbon Chisel C138 and uses most 1/2″ square shank chisels sold separately.
Specifications: 4,000 blows per minute at 90 psi., cfm 8, 1 1/16″ stroke, 15/16″ diameter piston and 1/4″ air inlet. Made in the U.S.A. with a one year warranty.
| Model | Length | Weight | Price |
|---|---|---|---|
| ERS32-182 | 2 feet 8 inches | 7 lbs | Call for pricing |
| ERS48-182 | 4 feet 8 inches | 9.5 lbs | Call for pricing |
| ERS60-182 | 5 feet | 11.5 lbs | Call for pricing |
| ERS72-182 | 6 feet | 12.25 lbs | Call for pricing |
Long Reach Stainless Steel Scalers
Our Stainless Steel Long Reach Scaler built for spark-resistant, contamination free, industrial applications. Constructed with a stainless steel throttle body and scaler body – the ultimate corrosion resistant cleaning tool. Offered in four different lengths to reach your toughest job. Beryllium Copper Chisels or Needles are required for non-spark environments. Comes with Wide Flat Carbon Chisel, C138 and is compatible with 1/2″ square shank chisels sold separately.
Specifications: 4,000 blows per minute at 90 psi., cfm 8, 1 1/16″ stroke, 15/16″ diameter piston and a 3/8″ air inlet. Made in the U.S.A. with a one year warranty.
| Model | Length | Weight | Price |
|---|---|---|---|
| ERS32-400 | 2 feet 8 inches | 7.2 lbs | Call for pricing |
| ERS48-400 | 4 feet | 9.7 lbs | Call for pricing |
| ERS60-400 | 5 feet | 11.7 lbs | Call for pricing |
| ERS72-400 | 6 feet | 12.5 lbs | Call for pricing |
MCH Heavy Duty Long Reach Chipper
The MCH Heavy Duty Long Reach Chipper allows you to stand while preparing concrete surfaces or removing heavy surface buildup on flat surfaces. Choose this model when you need a heavier-hitting chipper (3,000 bpm) than the ERS Models (4,000 bpm) shown above. The MCH uses the larger, oval collar, round shank accessories. Comes with the Wide Flat Chisel, 1 1/2″ W x 9″L, part number C15680. 
Specifications: 3,000 bpm at 90 psi, cfm 28, 2″ stroke, 7/8″ diameter piston and 1/2″ air inlet. Made in the U.S.A. with a one year warranty.
| Model | Length | Weight | Price |
|---|---|---|---|
| MCH-48 | 4 feet | 13.35 lbs | Call for pricing |
| MCH-60 | 5 feet | 14.15 lbs | Call for pricing |
| MCH-72 | 6 feet | 14.35 lbs | Call for pricing |
PDF 
Extra Large S Hooks
Hang-It Clamp
